PHANTOM 4 Prop Guards Installation Guide
In the Box Prop Guards × 4 Specifications Weight (1pc) 18 g Angle 163.0° Radius 136.5 mm Installed Circumference 624.5 mm Installation Follow the instructions below to install the Phantom 4 Prop Guard. The Obstacle Sensing System is automatically turned off when the Prop Guards are attached. The aircraft will not be able to avoid obstacles during flight. © 2016 DJI. All Rights Reserved.
1 Remove all four plastic stoppers from the Prop Guard mounting holes. Retain the original plastic stoppers and store them someplace safe for future use. © 2016 DJI. All Rights Reserved.
2 Release the lock arm from its original locked position and insert the arm into the Prop Guard mounting hole. B A © 2016 DJI. All Rights Reserved.
3 Snap the lock arm back to its original position, making sure it is tightly secured. Repeat step 1 to step 3 to install the remaining Prop Guards. The content is subject to change. Download the latest version from http://www.dji.com/product/phantom-4/info#downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2016 DJI. All Rights Reserved.
