DJI Remote Start/Stop User Guide 2016.06 V1.
Disclaimer and Warning Congratulations on purchasing your new DJI TM product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your DJI product or damage to other objects in the vicinity.
solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make available. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
In the Box Remote Start/Stop ×1 Power Cable ×1 Introduction The DJI Remote Start/Stop is designed to be used with a RONINTM series gimbal or DJI Focus to control the camera for video recording or taking photos. 4 1 1. Power Port (CAN Port) 2. Camera Port 3. Reserved Port 4. Quick-Release Mount 4 © 2016 DJI All Rights Reserved.
Using with the Ronin Series Gimbal Installation 1. Loosen the knob on the Quick-Release Mount of the Remote Start/Stop, then attach the Remote Start/Stop to one of the extension rods on the gimbal. Choose a rod that provides enough room to connect the Control Cable to your camera. Adapter © 2016 DJI All Rights Reserved.
The extension rod is not included in the Ronin-MX or Ronin-M’s package. Visit the Official DJI Online Store for more information. The Remote Start/Stop can be clamped to a 15 or 19 mm rod. To clamp the Remote Start/Stop to a 19 mm rod, first remove the step-down adapter on the QuickRelease Mount. If necessary, the Quick-Release Mount can be removed to mount the Remote Start/ Stop to a desired position.
2. Connect the Power Port on the Remote Start/Stop to the LB Port on the gimbal by using the provided Power Cable for power supply and communication. Power Port Camera Port 3. Connect the Camera Port on the Remote Start/Stop to the camera by using the proper Control Cable for your camera. The following section describes which Control Cable corresponds to which camera model, and how to set up your camera properly. © 2016 DJI All Rights Reserved.
Control Cables Type Supported Camera Control Cable for BMCC BMCC/BMPCC Control Cable for Canon Canon 5D/6D/7D Control Cable for Hasselblad Hasselblad A5D Control Cable for Panasonic Panasonic GH3/ GH4 Control Cable for RED RED Control Cable for Sony Sony Alpha 7 Series Visit the Official DJI Online Store for more information about the Control Cable. 8 © 2016 DJI All Rights Reserved.
Camera Settings and Connections 1. BMCC/BMPCC No required settings. Connect the Control Cable to the Remote Port on the camera. 2. Canon 5D/6D/7D Set the camera to Video Recording Mode and Infrared Control Mode (Self-timer Mode). Then point the infrared light from the Control Cable to the camera’s receiver. 3. Hasselblad A5D No required settings. Connect the Control Cable to one of the Control Connector Ports on the camera. 4.
Protocol from the Serial Protocol dropdown menu. Connect the Control Cable to the CTRL Port of the camera. 6. Sony Alpha 7 Series Camera Enable the Remote Control function on the camera and point the infrared light from the Control Cable to the camera’s receiver. Operation 1. When using with the Ronin series gimbal on the ground, toggle the FUNCTION switch quickly from Position 2 to Position 1 and back to Position 2 to take photos.
Operating the Remote Start/ Stop will not affect the primary operations of the FUNCTION Switch. 2. When using the Remote Start/Stop with the Ronin-MX and Matrice 600, press the Shutter button or the Video Recording button to take photos or record video. Using with the DJI Focus Installation 1. Attach the Remote Start/Stop to the extension rod. 2.
Remote Start/Stop to the camera by using the proper Control Cable. The required camera settings and connections are the same as when using the Ronin series gimbal. Visit the Official DJI Online Store for more information about the dedicated Power Cable. Operation 1. On the DJI Focus remote controller, go to Menu > Settings > Camera Control > On to enable remote camera control. 2. Press the D button once to start/stop recording. Press and hold the D button to take photos. 50.
Specifications Dimensions 40 mm × 21 mm × 44 mm Weight 37 g Operation Voltage 4.5 - 16 V Operation Current 30 mA@12 V Operation Temperature 5° to 131° F (-15° to 55° C) © 2016 DJI All Rights Reserved.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. EU Compliance Statement SZ DJI TECHNOLOGY CO., LTD.
EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany © 2016 DJI All Rights Reserved.
DJI Support http://www.dji.com/support The content is subject to change. Download the latest version from http://www.dji.com/product/ronin-mx If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. RONINTM is a trademark of DJI. Copyright © 2016 DJI All Rights Reserved.
