Operation Manual
Ronin-MX
User Manual
12
©
2016 DJI All Rights Reserved.
3. The optional Intelligent Battery Power Distributor with an Intelligent Battery is
mounted here to supply power to a RED camera or other accessories if needed.
TIPS
Visit the Ofcial DJI Online Store to learn more about the Intelligent Battery
Power Distributor.
Note that the Intelligent Battery Power Distributor can only supply power to the
camera or other accessories and will not power the Ronin-MX.
WARNING
If using the P-TAP Accessory Power Port at the bottom of the Ronin-MX as a power
source for your camera or accessory, make sure the combined total P-TAP output
is below 3 A. Do not use the P-TAP Accessory Power Port to supply power for RED
cameras or accessories with rated currents exceeding 3 A, otherwise the Ronin-MX
may become damaged.
Mounting the Camera
The Ronin-MX uses an adjustable camera mounting plate that allows you to easily balance,
install, and remove the camera. The Ronin-MX has been tested with the following types of
cameras. Other cameras similar in size and weight may also be compatible.
Supported Cameras
ARRI ALEXA Mini* Canon 5D MK III Panasonic GH3
Black Magic Cinema Camera* Canon 6D Panasonic GH4
Black Magic Pocket Cinema Camera Canon 7D RED EPIC*
Canon 1Dc Canon C100 Sony Alpha 7 Series
Canon 5D MK II Nikon D800
* Must be used with dedicated camera accessories. Visit the Ofcial DJI Online Store to learn more.
Camera Size Requirements
The maximum depth from the center of gravity on the camera base plate is 120 mm.
The maximum height, measured from the top of the camera base plate, is 130 mm. The
maximum width is 160 mm.
NOTICE
Make sure the camera is powered off during installation.
It is recommended to use soft connection cables to avoid obstructing camera
movement.