Operation Manual

Ronin-MX

User Manual

4. With the gimbal facing outward on the tuning stand, slide the mounting plate into the

receiver until the safety lock engages. Adjust the vertical position of the crossbar to

meet the camera upper mounting plate.

5. When the camera achieves a rough balance, tighten the camera base side clamp and

the lock-knobs.

TIPS

You can adjust the tightness of the clamp with an M3 Allen wrench.

The steps above are suitable for most cameras. When mounting a RED or ARRI

camera, the proper camera accessories must be used.

6. You can also rotate the camera mounting plate 180 degrees to mount a camera upside-

down when necessary in certain congurations.

3. Mount the Camera Upper Mounting Plate to the top of the camera through the hot shoe

and then tighten the screws.

TIPS

When mounted on an aircraft, make sure the camera has a full, unobstructed range

of motion when pointed down at 90 degrees. If the power distribution box prevents a

full range of motion after it is balanced, try mounting the camera upside-down.