Operation Manual

Ronin-MX User Manual
22
©
2016 DJI All Rights Reserved.
3. Smoothing
When the control stick input is released, the translated movement will be smoother and
slower than if the smoothing is increased. If smoothing is set to 0, the slowdown will be
translated as an abrupt stop. The Thumb Controller and remote operator control sticks
can be set independently. Pan and tilt smoothing can also be independently adjusted.
4. Endpoint
Pan axis endpoint settings determine the farthest points to which the gimbal will rotate left
or right during controller input. Pan axis endpoints can be adjusted independently, for left
and right movement, when used with a Remote Controller or the Thumb Controller.
Tilt axis endpoint settings control the maximum points to which the gimbal can rotate up
or down. Tilt axis endpoints can be adjusted independently for up and down movement
when used with a Remote Controller or the Thumb Controller.
The pan and tilt endpoints can be tested. Ensure the camera is unobstructed before
tapping the Test buttons.
TIPS
If the endpoint settings for pan axis are set to 0, which means there are no endpoints
for the pan axis so that the gimbal can rotate 360 degree continuously. If set to 0, the
pan axis will not move when the “Test Pan Endpoints” button is pressed.
5. Channels
The channel indicator provides feedback during remote operator conguration. Pan, tilt,
and roll can be re-assigned to either of the Remote Controller sticks. Each axis can also
be reversed.
6. Settings
Controller Priority: If both input devices simultaneously send control signals to the gimbal,
the input from the selected controller will take priority and will control the device at that
given time.
？
Gimbal Control Viewer More
N/A
Mode：
Test Pan Endpoints
Test Tilt Endpoints
Endpoint Adjustments
Test
Pan Axis
Left Right
Up Down
Tilt Axis
Control
Endpoint
0 0
0 0
？
Gimbal Control Viewer More
Smoothing Adjustment
Thumb
Controller
Remote
Operator
Pan
Tilt
Control
Smoothing
15
15
15
15