Operation Manual

Ronin-MX

User Manual

You can view the latest rmware version information on this page. Upgrade the rmware

by following the steps below:

1. Connect the Ronin-MX to your computer via the Micro USB cable and wait until the

indicator LED in the DJI Assistant blinks blue.

2. Click “Upgrade”.

3. Wait for the download to nish.

4. Click “Upgrade” again and then click “Conrm”.

5. Power the Ronin-MX off and then on after the upgrade is complete.

WARNING

If upgrading the Ronin-MX on the Matrice 600, make sure to power off the

Matrice 600 or disconnect the CAN cable rst. Otherwise the upgrade will fail.

TIPS

Ensure that your computer is connected to the Internet.

Close any antivirus programs and network rewalls.

Ensure that the Ronin-MX is powered on during the upgrade. Do not power off

the Ronin-MX until the upgrade is complete.

Do not disconnect the USB cable during the upgrade.

Upgrade