Operation Manual

Ronin-MX User Manual
40
©
2016 DJI All Rights Reserved.
DJI GO App Tuning
You can adjust software parameters and congure your Ronin-MX by using the DJI GO
app. Launch DJI GO and then enter Camera view.
AE
22:02
LOG
60
1080P
ISO
F
EV
1600
2.8
2.0
1/50
09:29
61%
P-GPS
12
M/S
M/S
H: D:
V.S
H.S
4.22.3
39M 210M
232M
MENU
SAFE TO FLY GPS
Setting App Output Mode
Set the App Output Mode in the DJI GO app to display the image on your mobile device
from the camera used with the Ronin-MX.
1. Tap
and then Disable EXT Port.
2. Adjust the Bandwidth Allocation to ensure that the “HDMI” percentage is more than 0%.
3. Set the App Out Mode to HDMI.
Gimbal Working Mode
Tap to select a gimbal work mode: Follow Mode, FPV Mode and Free Mode.
Follow Mode: the angle between the gimbal’s orientation and the aircraft’s nose remains
constant at all times. The pan, tilt and roll axes can be adjusted by the Remote Controller.
FPV Mode: The gimbal will synchronize with the movement of the aircraft to provide a
rst-person perspective ying experience.
Free Mode: The gimbal’s pan axis is not aligned with the aircraft’s nose. The pan, tilt and
roll axes can be adjusted by the Remote Controller.
TIPS
The pan axis of Ronin-MX will be only able to rotate within ±30 degrees if the
landing gear of the Matrice 600 is lowered.
Gimbal Settings
Tap > to congure the gimbal.
TIPS
The denition and function of every button in the DJI GO app and DJI Assistant
app are the same, refer to the section describing the DJI Assistant app for
more details.