Operation Manual

©
2014 DJI. All Rights Reserved.
11
Mounting Electronics and Wiring
Eight positions are reserved for mounting a flight control system, wireless video transmission module,
receiver, and other accessories. The DJI A2 ight control system has been used here as an example. If using
an A2, follow mounting and wiring instructions found in the A2 ight control system user manual. If using
the DJI WK-M ight control system, please refer to the WK-M user manual for connections. Also be sure the
rmware on your DJI ight controller has been updated to the latest version.
Instructions
1. Attach IMU module to the IMU area of the center frame. Ensure that it points toward the nose.
2. Attach the PMU module to the center frame.
Only mount the IMU in the IMU position of the center frame.
3. Mount the ight controller in the reserved position near the PMU module.
Mounting Electronics and Wiring
2S
V-SEN
X1
PW
3V 5V
6S
@
(2V 6V)
P M U
@
A2 Flight Controller
CAN1
ANT
S2
X1
S1
X2
X3
F1
F2
F3
F4
M1
M2
M3
M4
M5
M6
M7
M8
CAN2
LEDLINK
CONTROLLER UNIT
CAN1
ANT
S2
X1
S1
X2
X3
F1
F2
F3
F4
M1
M2
M3
M4
M5
M6
M7
M8
CAN2
LEDLINK
CONTROLLER UNIT
Reserved Position
IMU