Operation Manual

In The Box

Center Frame ×1 Frame Arms ×6

Landing Skid Tubes ×2

(with Silicone Rubber Dampers)

Landing Gear Legs ×2

GPS Collapsible Mount ×1 Springs ×2

Connection Cable Accessories Package ×1

Connector Set ×1

3-PIN Connection Cables ×8

CW propellers ×2

CCW propellers ×2

Magic tapes ×4

The red knobs ×6

Landing gear leg rings ×4

Soft dampers ×50

3-PIN Servo Cable ×1 Screw Package ×1

For frame arms mount: M4×35

For landing gear mount: M3×8,

M2.5×8 (socket cap), M3×22 (socket cap)

Tools Required

Tools Usage

2.0mm Hex Wrench, 2.5mm Hex Wrench Mounting screws.

Thread Locker Fastening screws.

Nylon Cable Tie, Scissors, Cutting Pliers/Dykes Binding devices and wires.

Foam Double Sided Adhesive Tape Mounting receiver, controller and other modules.

In The Box