User manual

Spreading Wings S900

User Manual

7. Check that every anti-drop screw has been firmly installed in the reserved positions. Thread locker is

recommended.

(1) Remove the anti-drop screws to apply appropriate thread locker.

(2) Replace and tighten.

8. Note that the dampers are 30° silicon rubber. If you use other dampers or vibration absorbing balls, the

quality of your aerial photography may be affected.

Use glue to install the GPS bracket. Ensure it is rm and stable before every ight.

Mount the GPS with a bracket to avoid interference from the center frame power board.

Always test motors using the Assistant Software after installation. Refer to your ight control system

user manual for details.

Mounting Electronics and Wiring

dampers