User manual

Spreading Wings S900

User Manual

Using the Propeller Holder

Instructions

1. Insert the propeller blades into the propeller holder. 2. Attach the propeller holder to the frame arm.

Assembling Motor Vibration Absorbers

A soft gasket is part of the vibration absorber. Assemble soft gaskets as shown below. Assembly is the same

for CCW and CW propellers.

Before installing the soft gaskets, put the copper rings onto the four mounting holes on the carbon

plate. Then put the soft gaskets into the mounting holes.

After tightening the screws, the vibration absorbers may be twisted. If this is the case, hold the

motor with your thumbs under the base plate and ngers on the top carbon plate, and squeeze the

plates together to make the vibration absorbers at and parallel with the plates.

FAQ