ZENMUSE X4S User Manual 2017.01 V1.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Printing this Document This document supports high resolution printing.
Contents Read Before the First Flight 2 Legends 2 Using this manual 2 Getting more information 2 Contents 3 Product Profile 4 Introduction 4 In the Box 4 Overview 4 Installation 5 Read the information below before setting up your Zenmuse X4S Supported Devices 5 5 Mounting the Zenmuse X4S to the aircraft 5 Mounting the Zenmuse X4S to the Inspire 2 5 Mechanical Range 6 Using the Remote Controller 6 DJI GO 4 App 7 Downloading 7 Launching the DJI GO 4 app 7 Camera Operation
Product Profile Introduction Featuring a 1-inch CMOS sensor and large pixels measuring 2.4μm per pixel, the Zenmuse X4S is capable of capturing 20 megapixel stills and capturing 11.6 stops of dynamic range. It can record 4K/60 H.264 and 4K/30 H.265 videos at a 100Mbps bitrate. A variety of shooting modes are available for a better shooting experience. 14 image Burst and AEB is available. The Zenmuse X4S has an 8.8mm/F2.8-11 lens, which is compact with low distortion and a field of view of 84°.
Installation Read the information below before setting up your Zenmuse X4S Supported Devices The Zenmuse X4S can be attached to the following device, and will be compatible with other DJI devices in the future. DJI Inspire 2 Mounting the Zenmuse X4S to the aircraft Mounting the Zenmuse X4S to the Inspire 2 Power off the aircraft before installation. 1. Remove the camera body cap from the Zenmuse X4S. 1 2. Press the gimbal and the camera release button on the Inspire 2.
ZENMUSE X4S User Manual Protect the Gimbal Connector 2.0 at all times. Always ensure that the Gimbal Connector 2.0 on the Inspire 2 is in the right position when mounting, otherwise the camera will not mount. DO NOT detach the Zenmuse X4S when the aircraft is powered on. Mechanical Range The 3-axis gimbal provides an incredibly stable and mobile platform for the camera system to capture completely smooth images and videos.
ZENMUSE X4S User Manual 1. Left Dial Scroll this dial to control tilt the gimbal. Scroll this dial while pressing C1 to control yaw the gimbal; Scroll this dia while pressing C2 to control tilt of the FPV. 2. Record Button Press once to start video recording. Press again to stop recording. 3. Shutter Button Press to take a photo. If burst mode is selected, the set number of photos will be taken with one press. 4.
Camera Operation Touch Interface The touch interface can be used for capturing photos, recording videos and playback. Professional photography configurations are also available. 1 READY TO GO (GPS) 2 3 74% 70% 12 P-GPS R 09:29 ISO 200 SHUTTER 1/200 F 5.6 EV 0.3 WB Auto 4 4KP30 SD TIME 20:12 5 4.07V 4.07V AF/MF AE 6 7 8 9 10 11 FPV 12 1. 2. 3. 4. 5. 6. 7.
ZENMUSE X4S User Manual 2. AEB (Auto Exposure Bracketing) Take 3 or 5 bracketed frames with ±0.7EV steps for exposure compensation. 3. Timed Shot Take photos in 2, 3, 5, 7, 10, 15, 20, 30 or 60 second intervals. Recording You can start recording in the following two ways: , and then DJI GO 4 App: Tap Shutter/Record Switch button to activate video recording mode tap the button . Tap once to start recording video, then tap again to stop recording.
ZENMUSE X4S User Manual White Balance White balance (WB) is the process of removing unrealistic color casts. Correcting white balance can help avoid the color casts, thereby improving photos under a wider range of lighting conditions. White balance can be either set into a fixed value or a dynamic value automatically. Tap“ ”-> ->Whit Balance. 1. Auto (AWB) The camera adjusts the white balance automatically. 2.
ZENMUSE X4S User Manual Specifications Center Point None, Circle, Cross, Narrow Cross, Square (No Center Point), Square (w.Center Point), Bracket(No Center Point), Bracket (w.
ZENMUSE X4S User Manual Update Firmware The firmware of the Zenmuse X4S should be updated together with the Inspire 2. Using an Inspire 2 with the Zenmuse X4S mounted as an example. Method 1: Using the DJI Assistant™ 2 1. 2. 3. 4. 5. 6. 7. Power on the Intelligent Flight Battery, and toggle the USB Mode Switch down. Connect the Inspire 2 and the PC via the USB cable (with double A ports). Launch DJI Assistant 2 and login with a DJI account. Click Inspire 2 and the firmware update button.
Sensors 1 inch CMOS Sensor Effective Pixels 20MP Image Size 3:2, 4:3, 16:9 ISO Range Photo:100-25600 Video:100-6400 Shutter Speed Mechanical Shutter Speed: 8 – 1/2000 s Electric Shutter Speed:1/2000 s -1/8000 s FOV 84° Still Photography Modes Single Shot, Multiple(3/5/7/10/14frames), AEB(3/5bracketed frames at 0.7EV bias), Timed Shot(2/3/5/7/10/15/20/30/60s) Video Recording Modes H.264 C4K: 4096×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps 4K: 3840×2160 23.976/24/25/29.97/47.95/50/59.
DJI Support: http://www.dji.com/support This content is subject to change. Download the latest version from http://www.dji.com/zenmuse-x4s If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2017 DJI. All Rights Reserved.
