Operation Manual

ZENMUSE X4S User Manual

Update Firmware

The rmware of the Zenmuse X4S should be updated together with the Inspire 2. Using an Inspire 2

with the Zenmuse X4S mounted as an example.

Method 1: Using the DJI Assistant™ 2

1. Power on the Intelligent Flight Battery, and toggle the USB Mode Switch down.

2. Connect the Inspire 2 and the PC via the USB cable (with double A ports).

3. Launch DJI Assistant 2 and login with a DJI account.

4. Click Inspire 2 and the rmware update button.

5. Select the rmware version required.

6. DJI Assistant 2 will download and upgrade the rmware automatically.

7. Restart the aircraft after the rmware upgrade is complete.

Method 2: Using the DJI GO 4 App

1. Power on the Intelligent Flight Battery, and toggle the USB Mode Switch up.

2. Connect the aircraft and your mobile device via an appropriate USB cable.

3. Follow the on-screen instructions in the DJI GO 4 app to upgrade. Connect to the Internet when

downloading rmware.

4. Restart the aircraft after the rmware upgrade is complete.

During update, the aircraft will beep steadily. Then the beep will alternate between a

longer beep and a quick double beep once the update is complete. Restart the aircraft

after the rmware update is complete.

If the warning sound turns into a long beep, retry the update.

The battery level should be above 30% for the rmware update process.

When using the DJI GO 4 app to update, you may disconnect the aircraft and the mobile

device once the update is more than 30% completed. No Internet connection is required.

Appendix

Specications

General

Name Zenmuse X4S

Dimensions 125 mm (W) × 100 mm (H) × 80 mm (D)

Weight Approx. 253 g

Operating Temperature Range -4° to 104℉ (-20° to 40℃)

Storage Temperature -4° to 140°F (-20° to 60°C)

Camera

Lens F/2.8-11, 8.8mm(35mm format equivalent: 24mm)