Operation Manual

ZENMUSE X4S User Manual

Protect the Gimbal Connector 2.0 at all times.

Always ensure that the Gimbal Connector 2.0 on the Inspire 2 is in the right position when

mounting, otherwise the camera will not mount.

DO NOT detach the Zenmuse X4S when the aircraft is powered on.

Mechanical Range

The 3-axis gimbal provides an incredibly stable and mobile platform for the camera system to

capture completely smooth images and videos. The gimbal can tilt the camera up to 170 degrees,

pan 320 degrees and roll 20 degrees in either direction.

Take off from at, open ground and protect the gimbal at all times.

Using the Remote Controller

Press the Shutter Button to capture photos or the Record Button to record videos. Adjust the

camera's tilt using the left dial. Turn the right dial to adjust camera settings.

+40°

+20°

-20°

-130°

0°

Ground Level

320°

-320°