Operation Manual

ZENMUSE X4S User Manual

1. Left Dial

Scroll this dial to control tilt the gimbal. Scroll this dial while pressing C1 to control yaw the

gimbal; Scroll this dia while pressing C2 to control tilt of the FPV.

2. Record Button

Press once to start video recording. Press again to stop recording.

3. Shutter Button

Press to take a photo. If burst mode is selected, the set number of photos will be taken with one

press.

4. Intelligent Flight Pause Button

Press once to exit from TapFly™, ActiveTrack™ and Advanced modes.

5. Right Dial

Press once and then scroll to set camera settings. Re-active this function after10s‘ free of

operation.

6. C2 Button

Set in DJI GO 4 app.

7. C1 Button

Set in DJI GO 4 app.

DJI GO 4 App

Downloading

Search for “DJI GO 4” in the App Store, or download at www.dji.com.

Launching the DJI GO 4 app

1. Power on the remote controller and the aircraft.

2. Connect the remote controller and your mobile device via a USB cable.

3. Launch the DJI GO 4 app after connecting, and the live HD video stream will begin.