Operation Manual

ZENMUSE X5

User Manual

4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the

camera lens into the body of the camera.

5. Rotate the camera lens clockwise until you hear a click.

6. Rotate the Lens Lock counterclockwise to lock it.

7. Mount the Balancing Ring (or a lter) and the Lens Hood.

8. Insert the Micro SD card.

To remove the camera lens, power off the battery and then:

1. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.

2. While holding down the Lens Release Button, rotate the camera lens counterclockwise to

detach it.

Lens Release Button

It is recommended to wrap the dust cover around the lens for aerial applications. The

DJI specied dust cover can be installed on the DJI MFT 15mm f/1.7 ASPH and the

Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH. Purchase an appropriate

dust cover for the Olympus M.Zuiko Digital ED 12mm f/2.0 if necessary.

It is important to tighten the Lens Lock after attaching the camera lens, as this can

reduce the vibrations of the lens when the aircraft is moving in ight. Always loosen

the Lens Lock before attaching and detaching the camera lens.

A lter can be installed in place of the Camera Balancing Ring. Remember to use a

lter that fullls the weight requirement.

The Lens Hood can only be installed on the DJI MFT 15mm f/1.7 ASPH or Panasonic

Lumix G Leica DG Summilux 15mm f/1.7 ASPH. DO NOT install the Lens Hood on

the Olympus M.Zuiko Digital ED 12mm f/2.0.

Lens Hood

Balancing Ring (or Filter)

Micro-SD

Click