Operating instructions

100 Issue 1.0 March, 2006
Form 29 - CO Line Specifications #1
Data  01 02 03 04 05 06 07 08
Range 0-2 0-8 0-9 0-8 0-8 0-1 0-9 0-9
Default 0 0 0 0 0 0 0 0
Item Valid
Settings
Description Default
29-tk-01 0 CO Line Length 0=0 km
29-tk-02 0-8 UCD-1 Function Enable 0=Disable
29-tk-03 0-9 ISDN Incoming Call Type 0= InBlock
29-tk-04 0-8 Set Ring Frequency (KPU Only) 0=H/set Setting
29-tk-05 0-9 Allow Audible Ring for Incoming Calls 0=All Stations
29-tk-06 0-1 1A2 Emulation feature 0=Disable
29-tk-07 0-9 CO Delayed Ring Timer to Hunting Group 0=Disable
29-tk-08 0-9 CO Delayed Ring Overflow Hunting Group 0= Hunt Group
29- XX -01-– CO L INE L OOP R ESISTANCE :
This parameter allows adjustment of the system’s analog trunk interface to adapt to different CO loop
resistance.
0 = 0 Km (default) 1 = 3 Km 2 = 5 Km
29- XX -02 - UCD F UNCTION S ELECTION :
This parameter enables or disables the UCD function for each trunk individually and is able to select whether
UCD operates in Day or Night or Both Modes.
0 Day Disable - Night Disable 1 Day Disable - Night Enable
1
2 Day Disable - Night Enable
2
3 Day Disable
1
- Night Disable
4 Day Enable
1
- Night Enable
1
5 Day Enable
1
- Night Enable
2
6 Day Enable
2
- Night Disable 7 Day Enable
2
- Night Enable
1
8 Day Enable
2
- Night Enable
2
*1: Enable UCD-1 function only when all ring assigned stations are busy.
*2: Enable UCD-1 function when time set in mode 05-09-06 has elapsed even if the ring
assigned stations are idle.