Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
107
Form 38 - Alternate CO Line Groups (Dial 87 Groups)
General:
This program permits each line to be assigned to different groups which can be accessed by dialing [87]. There
are 8 groups in total. This group will be available to a station in addition to it's dial 9 group. Set outgoing calls to
start from the highest installed line and program in descending order to the lowest line installed. This will prevent
call collision particularly in systems with SLT's. Press [REDIAL] to clear all entries in the table before entering
required trunks.
Description:
This program is different from Form 36-gp-tk. This program is used for dialing [87] to access a Line.
Once a dial [87] group has been programmed it will need to be assigned to the stations that are to use it
in Form 46-Stn-01.
Related System Programming Mode: 36, 38, 41-ST-04, 46-ST-01