Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
113
Form 43 - Port Assignments
43-cn-IP Port
st 0 1 2 00 00
cn = Port No. (2 digits) IP = 01-06
Parameters for the port
Item
Valid
Settings Description Default
43-cn-01 nnnn Station Number (2 to 4 digits) System
43-cn-02 0-9 Equipment Type System
43-cn-03 1-8 DSS Key Group (Form 08) 1
43-cn-04 0-8 Disallow SLT Connection 0=Yes
43-cn-05 00-09 Reserved 00
43-cn-06 00-09 Reserved 00
43-cn-07 00-99 Reserved 00
43-cn-08 00-99 Reserved 00
cn = Position Number on Card (11-68)
In the TD-1648i/TDS-600 , the port number consists of 2 digits
11~18: station ports on the 1
st
G2-STU card.
21~28: station ports on the 2
nd
G2-STU or G2-SLU card
31~38: station ports on the 3rd G2-STU or G2-SLU card
41~48: station ports on the 4th G2-STU or G2-SLU card
51~58: station ports on the 5th G2-STU or G2-SLU card
61~68: station ports on the 6th G2-SLU card
General:
This program permits each port to be assigned different parameters and station numbers.
Note: Extension names are programmed using this form as well. See details on the next page.
43- PORT -01 - S TATION E XTENSION N UMBER :
Valid entries: 10-69 (2 digit) 100-699 (3 digit) 1000-6999 (4 digit)
43- PORT -02 - E QUIPMENT T YPE : (Recognized by the system Automatically)
0=No Equipment Connected 1=Digital Telephone without LCD
2=Digital Telephone with LCD 3=Hybrid function for Digital Phone with SLT adapter installed
4=Single Line Telephone 5=DSS Console (Only on even numbered ports)
6=Reserved 7=Music On Hold Port
8=Voice Mail Port 9=Reserved
D=Doorphone
Note: Equipment Type 7 & 8 (above) are the only items that can be programmed. All other entries are
auto-detected by the system. Program equipment type 8 only when a single line circuit is
connected to a voice mail port. Equipment type 7 is only when a single line circuit is connected
to a Music-On-Hold adapter.