Operating instructions
TransTel TD-1648i / TDS-600 Programming Manual
115
Form 44 - Station Class of Service (Part 2)
Item
Valid
Settings
Description
Default
44-st-01 0-1 System Alarm 0=Enable
44-st-02 0-1 Hold feature 0=Enable
44-st-03 0-1 Call Split 0=Disable
44-st-04 0-1 Manual Line 0=Disable
44-st-05 0-1 Headset feature 0=Disable
44-st-06 0-1 Use Engineering Password 0=Enable
44-st-07 0-1 DTMF Receiver Control for Voice mail Ports 0=Normal Timeout.
44-st-08
44-st-08
0-1
0-1
Station Alarm Signal Type
Voice Mail Unsupervised Conference/ECF
0=Music
0=Disabled
44-
EXT
-01
-
S
YSTEM
A
LARM
S
TATION
:
If disabled, the station will not receive system alarm clock signals
0=Enable 1=Disable
44-
EXT
-02
-
C
ALL
H
OLD
:
0=Hold is allowed 1=Hold is not allowed
44-
EXT
-03
-
C
ALL
S
PLIT
:
If the setting is allowed, the station will be able to activate the call split function. When activated and the
station presses hook flash after placing a call on hold the call will not be retrieved. Dialing 9 (or 0) or 72 will
retrieve the held call. When not allowed the station will only be allowed to transfer a call. It cannot access a
second outside line.
0=Call split allowed 1=Call split not allowed
Related System Programming Mode: 07(code 26), 44-st-03
44-
EXT
-04
-
M
ANUAL
L
INE
:
If enabled, this options will caus
e a station to ring the console group when it goes off
-
hook.
0=Disable 1=Enable
44-
EXT
-05
-
H
EADSET
O
PERATION
: This item controls whether the telephone can be placed in headset mode.
In many locations, the prefix (office code) 775 exists as a local call. Frequently, keyset callers will neglect to
dial 9 or press a CO line before commencing to dial. When 775 is entered, the telephone is placed in headset
mode.
The result is that the telephone appears to lose audio functions. The end user is not aware of why and a
service call results. Setting 44-ext-05 to a value of 0, eliminates use of this feature. Phones not normally
equipped for headset use should have this option disabled (0).
0 = Cannot use 775 to enter and exit headset mode (FN:29 disabled also)
1 = Can use 775 or the Headset Key (DSS FN:29) to switch between handset and headset mode.
The LED of the headset key will be lit when in headset mode