Operating instructions

120 Issue 1.0 March, 2006
46- EXT -04 - DISA R ECALL C APABILITY T O O PERATOR (N O A NSWER /B USY ):
If this parameter is enabled then when a DISA call rings an extension but the station is busy or does not
answer (depending on setting) after the voice message announcing the status of the station is heard, the
system will recall the operator after the assigned DISA transfer time. Using settings 1 to 3 the called station
will continue to ring until the console answers the call. Using Settings 5 to 7 the call will ring the station for 1
cycle (Form 05-08-06) and then camp on to the console only and cease to ring the called station. If the
parameter is set to 0 then the call will stay at the station until answered or terminated.
0=No Recall to Operator 1=Recall on No Answer
2=Recall on Busy 3= Recall on Busy and No Answer
5=Recall on No Answer (Forwarding station stops
ringing)
6=Recall on Busy and Stop Busy Remind Tone at
Forwarding Station
7= Recall to Operator on No Answer/Busy (Stop Notification at Forwarding Station)
46- EXT -05 - M AXIMUM T RANSFER T IMES :
This feature allows the user or the automatic attendant console to re-transfer the same call for the number of
times set in this parameter.
0 = No Limit 1 = Allow 6 times 2 = Allow 7 times 3 = Allow 8 times
4 = Allow 9 times 5 = Allow 10 times 6 = Allow 11 times 7 = Allow 12 time
8 = Allow 13 times 9 = Allow 14 times
46- EXT -06 - D OOR U NLOCK /DND/CFWD A CCESS :
0 1 2 3 4 5 6 7
Door
Unlock
Disallow Allow Disallow Allow Disallow Allow Disallow Allow
DND Disallow Disallow Allow Allow Disallow Disallow Allow Allow
CFWD Disallow Disallow Disallow Disallow Allow Allow Allow Allow
46- EXT -07 - C ALL F ORWARD N O A NSWER TO A P RE - ASSIGNED H UNTING G ROUP : (Keysets and Single Line Sets)
This parameter allows Call forward No Answer to the pre-assigned hunting group. This parameter will not be
disabled if the user enables or disables the “Personal Call Forward” function, but will be temporarily
overridden. If the user has set the Personal Call Forward to some specified number, system will use “Personal
Call Forward” rule first. When the user disables Personal Call Forward, this option will once again go into
effect.
0=Disable 1-9=Forward to Hunt Group 1-9
Related System Programming Mode: 46-st-07, 68, 78-st-04
46- EXT -07 - ACP R ING TO A P RE - ASSIGNED H UNTING G ROUP : (ACP and Digital Doorphone only)
This parameter determine what station(s) will ring when an ACP doorbell button is pressed. Please note the
difference in ringing assignments when an ACP is connected..
0=Hunt Group 1 1=Hunt Group 2 2=Hunt Group 3
3=Hunt Group 4 4=Hunt Group 5 5=Hunt Group 6
6=Hunt Group 7 7=Hunt Group 8 8=Hunt Group 9
9=Hunt Group 10