Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
123
Form 50 - Station Class of Service (Part 5)
Item
Valid
Settings Description Default
50-st-01 0 Reserved 0
50-st-02 0 Reserved 0
50-st-03 0-1 ISDN Incoming Call Display type 0=CLI
50-st-04 0-1 CTI-Extension Status Report 0=Disable
50-st-05 0-1 Voice Mail Auto Logon Function 0=Enable
50-st-06 0 Reserved 0
50-st-07 0 Reserved 0
50-st-08 0 Reserved 0
50-st-IP STCOS
0 0 0 0 0 0 0 0
st = Station No. (2-4 digits) IP = 01-08
System Default
50- EXT -01 - R ESERVED :
50- EXT -02 - R ESERVED :
50- EXT -03 - ISDN I NCOMING C ALL D ISPLAY T YPE :
This parameter selects what will be displayed on the screen of an LCD phone when an incoming call is received,
either the Caller ID number or the ISDN Indial number. Caller ID on CO lines requires optional equipment to be
installed. This will also select what will be displayed on the SMDR output for incoming calls. This setting also
allows the naming of indials or Caller ID numbers using System Speed Dial Name / numbers. If this setting is a 1
then when an incoming call with Caller ID or an Indial number rings the TD-824i will search the System Speed
dials and if this number is entered then the name associated with it will be displayed on the screen.
0 = Caller ID / Name 1 = ISDN Indial Number / Name
50- EXT -04 - CTI-E XTENSION S TATUS R EPORT :
If enabled this parameter will output the extension status report for CTI application.
0 = Disable 1 = Enable
50- EXT -05 - V OICE M AIL A UTO L OGON F UNCTION :
0 = EnableVoice Mail Auto Log On String 1 = Disable Voice Mail Auto Log On String
Related System Programming Mode: 05-12-05, 50-ST-05
50- EXT -06 - R ESERVED :
50- EXT -07 - R ESERVED :
50-ext-08 - Reserved