Operating instructions

124 Issue 1.0 March, 2006
Form (51 to 59)-code-IP - Toll Plans – Allowed Digits – Class 1 to 9
Toll Control Forms
Forms 51 through 56 set exceptions (allow) to rules defined in corresponding forms 61 through 66. Form 51 &
61 correspond to toll class setting 1 as per Form 18 of the Td-824i. Forms 52 & 62 correspond to toll class
setting 2, through forms 56 & 66, which correspond to a setting of 6 on form 18.
Forms 57 through 59 are allow tables which provide for exceptions to complete toll restriction. There are no
corresponding forms to 57 through 59. If nothing is programmed on form 57, any station subject to toll class 7
will be restricted from placing any calls on a CO line. Forms 58 & 59 act in a like manner with respect to toll
classes 8 & 9.
Description:
There are 16 codes for each Toll Class and each code contains up to 12 digits
In default any station allocated to Toll Plans 1 to 6 will be able to dial unrestricted until the associated Modes are
programmed.
Allowed entries in this form are 0 to 9, d and
d = Don't care and means that any digit can be dialed in this position. _
<blank>= No digit is allowed to be dialed beyond this position.
If a digit is allowed as the beginning of a number then the entry should be filled with don't care's to the end of the
line or the caller will not be able to dial the full number.
Forms 51 to 56 are used in conjunction with Forms 61 to 66 and Forms 57 to 59 are used independently.
Toll Classes:
Class Function Prog. Mode
0
Unrestricted Default
1
Use Mode 51 for the Unrestricted numbers. Use Mode 61 for the Restricted numbers
Mode 51,61
2
Use Mode 52 for the Unrestricted numbers. Use Mode 62 for the Restricted numbers
Mode 52,62
3
Use Mode 53 for the Unrestricted numbers. Use Mode 63 for the Restricted numbers
Mode 53,63
4
Use Mode 54 for the Unrestricted numbers. Use Mode 64 for the Restricted numbers
Mode 54,64
5
Use Mode 55 for the Unrestricted numbers. Use Mode 65 for the Restricted numbers
Mode 55,65
6
Use Mode 56 for the Unrestricted numbers. Use Mode 66 for the Restricted numbers
Mode 56,66
7
Use Mode 57 for the Unrestricted numbers.
Mode 57
8
Use Mode 58 for the Unrestricted numbers.
Mode 58
9
Use Mode 59 for the Unrestricted numbers.
Mode 59
*
Use Mode 51-56 for unrestricted numbers. Use Mode 61-66 for all restricted numbers 000
D Cannot access the trunk line.
Note 1: Default numbers in Form 61, 62, 63, 65, 66 are: dddddddd
Note 2: Default numbers in Form 51, 52, 53, 55, 56, 57, 58, 59 are:------------
Note 3: d: Don't care: any digit is allowed in this position.
Note 4: _: The system does not allow any digits dialed after this symbol.