Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
127
Form 67 - Hunt Group Pilot Number Assignment
Item
Valid
Settings Description Default
67-gp-01 Hunt Group Pilot Number 00
67-gp-02 0-3 Hunt Group Ring Method 0=Common
General:
This program sets Pilot Numbers for Hunting Groups 1 to 10 and it’s ringing method.
67- GP -01 - H UNTING G ROUP P ILOT N UMBER :
There are 10 Hunt Groups available in the TD-1648i/TDS-600 . Each Hunt Group is assigned a Pilot Number in
this form. . It must be a unique number (it cannot be the same as an extension). It must be within the range
of valid numbers for extensions (2 digit numbering plan 10-69, 3 digit numbering plan 100-699, 4 digit
numbering plan 1000-6999).
Hunt group pilots can be assigned to be rung from Single Digit DISA.
67- GP -02 - H UNTING G ROUP R INGING M ETHOD :
Assign one of 4 ringing methods for each hunting group.
0 = Common 1 = Linear
2 = Circular 3= Follow programming Form 05-06-08
Once Hunting Ring Type is set here or in Mode 05-06-08 then ringing this pilot number will access the stations in
the group according to the ringing method selected and the order in which they are programmed in Form 68
(Day) and Form 69 (Night). Each Hunt Group can be from 1 to 5 stations in the TD-1648i/TDS-600 .
There are 3 types of Ring available, Common, Linear and Circular.
If Common Ring is enabled then calling the pilot number will always ring all available stations programmed in
Mode 68 or 69.
If Linear Ring is enabled then calling the pilot number will always call only the first available station in the order
in which they are programmed in Mode 68 or 69.
If Circular Ring is enabled then the stations will be called one after the other for each succeeding call until all
have taken a call and then the Ring will revert to the beginning of the Ring assignment and then repeat the
process.
Stations can remove themselves from receiving Hunt calls by using the DND key but this will also prevent them
from receiving direct calls.
It is still possible to call each station in the Hunting group directly by dialing it's own individual station number.
If a station in a Hunt Group has set call forward to a station or another Hunt Group (for instance Voice Mail
Group) then only direct calls to the station will be forwarded. If Hunt calls come to the station and it is call
forwarded it will still ring for the call.
Related System Programming Forms: 05-06-08, 67, 68, 69