Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
135
Form 77-Num - LCR – Modifying Table
7 7 - N u m - I P M o T a b
00 ddddd
ddddd
Num = 01~99
System Default.
Item Display
Pointer Data Programming Data Description Default
---------- ---------- ----------------------------------------------------------- -----------
01-02 00~10 Deleted Digit Length 00
03-12 0~9, *, Added Digits dddddddddd
#, -, d, T, p
General:
This program designs the rules for changing the dialed number to the routed number.
Description:
System will delete the first nn digits and then added the assigned digits in the front of the dialed numbers.
The added digits could be 0~9, *, #, p, T.
‘d’ is the wildcards.
‘_’ = Insert Extension Number (for LCR Extension Billing).
‘-‘ is no digit.
‘p’ is the pause character.
‘T‘ means to chain next modifying table with current one for long digit string.
For example if the carrier access code is 1346 and system inserts this before numbers dialed to route the calls to
this carrier. The example below is able to add the extension number into the dialed string of digits inserted by the
LCR tables.
77. = 00 1346_ddddd Where ‘_’ = Extension Number
Dialing 9 19042341234 from extension 201 using the above rule would result in 1346 201 19042341234 being
sent to the Line.
Dialing 9 14073452345 from extension 223 using the above rule would result in 1346 223 14073452345 being
sent to the Line.
Related system Programming: 05-13-07. 05-13-08, 75, 76, 77, 78-st-01, 78-st-02