Operating instructions

136 Issue 1.0 March, 2006
Form 78-st-IP - Station Class of Service – 6
78-st-IP STCOS
0 0 0 0 0 0 0 0
st = Station No. (2-4 digits) IP = 01-08
System Default
Item
Valid
Settings Description Default
78-st-01 0-5 LCR - Routing Level 0
78-st-02 0-1 LCR – Direct Access a Trunk 2=2
78-st-03 0-3 1A2 Emulation feature (Station) 0=None
78-st-04 0-9 Call Forward Busy To Assigned Hunt Group 0
78-st-05 0 Reserved 0
78-st-06 0 Reserved 0
78-st-07 0 Reserved 0
78-st-08 0 Reserved 0
78- ST -01 - LCR R OUTING L EVEL :
This parameter assigns the LCR routing level for each station.
0 = Disable LCR. 1 = Use the 1
st
priority trunk group only
2 = Use the 1
st
and the 2
nd
priority trunk groups only 3 = Use the 1
st
~3
rd
priority trunk groups only.
4 = Use the 1
st
~4
th
priority trunk groups 5 = Use the 1
st
~4
th
priority trunk groups.
Related system Programming: 05-13-07. 05-13-08, 75, 76, 77, 78-st-01, 78-st-02
78- ST -02 - LCR - D IRECT A CCESS A T RUNK :
This parameter assigns the right of the station to select a trunk directly under LCR environment is enabled.
0 = Do not allow to access a trunk directly (need to dial 9 [or 0] first)
1 = Allow this station to access a trunk directly (by pressing line key button)
2 = Allow this station to access a trunk directly (by pressing line key button). System will assign a dedicated idle
trunk for this extension. Stations which have this function enabled can only, access trunks, which are in their own
trunk group set in 41-stn-04. LCR Routing will still apply for the calls but if the LCR route (form 76) has the trunk
group set to 0 which means use station trunk group.
Related system Programming: 05-13-07. 05-13-08, 75, 76, 77, 78-st-01, 78-st-02