Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
137
78- ST -03 - 1A2 E MULATION (S TATION P ROGRAMMING ):
When an extension talks with a trunk, other extensions can make a conference by pressing this trunk's button if
1A2 Emulation is allowed.
0 = No 1A2 Access 1 = Access with tone notification upon entry
2 = Access without tone notification
1A2 Emulation status is setting below:
29-Tk-06 78-St-03 Status
0 N/A No access
1 0 No access
1 1 access with tone
1 2 access with no tone
Even if 1A2 Emulation status is programmed, an extension can temporarily disable it by pressing the Function
key:
[1A2 Emulation Privacy] – (FN:24 for DSS key in Form 07). When an extension sets 1A2 Emulation Privacy,
the key LED will light, and other extensions will not be able to access the line in use. When the extension presses
[1A2- Emulation Privacy] again 1A2 Emulation Privacy is cancelled and the LED will extinguish.
Related System Programming Mode: 07, 29-TK-06, 78-ST-03
78- ST -04 - C ALL F ORWARD B USY TO A A SSIGNED H UNTING G ROUP : (Keysets and Single Line Sets)
This parameter allows Call forward Busy to the pre-assigned hunting group. This parameter will not be
disabled if the user enables or disables the “Personal Call Forward” function, but will be temporarily
overridden. If the user has set the Personal Call Forward to some specified number, system will use “Personal
Call Forward” rule first. When the user disables Personal Call Forward, this option will once again go into
effect.
0=Disable 1-9=Forward to Hunt Group 1-9
Related System Programming Mode: 46-st-07, 68, 78-st-04