Operating instructions

Alternate Trunk Group Access (Dial 87)
In some applications, you may have more than one type of outside line. If you do, you will probably use
this method to access your secondary lines.
Lift the handset or Press SPKR.
Dial 87.
You will be connected to an available line in your alternate trunk group.
Answering Calls
There are several ways that you may answer calls at Your telephone. Depending on the particular type
of call and the system programming, calls may require different actions in order to answer them.
Intercom Calls
Voice Announce Call:
If the system is programmed for Voice Announce calls, you will hear a quick tone. The calling party will
then be routed to your speaker. To answer the call and have the ability to talk back to the caller, press
[MIC] (if your telephone is equipped with a speakerphone) or lift the handset .
Note: If your telephone is programmed for Auto Answer, your microphone will activate automatically
upon a voice announce call. It is not necessary to press any buttons to answer a call if your
station is in the Auto Answer mode.
Tone Signal Call:
If the system is programmed for Tone Signaling on Intercom calling, or if you are called by a Voice Mail
Port, you will hear a double ring that repeats until you answer the call. You may answer the call by
pressing [SPK] if your telephone is speakerphone equipped or answer by lifting the handset.
External Calls Ringing Your Telephone Set
For outside line calls that ring at your telephone, lift the handset or press [SPK]. You will be connected
to the call.