Operating instructions

Automatic Saved Number Redial
This feature is similar to Automatic Last Number Redial, but it adds the ability for you to save a number,
dial some other calls and then come back to it later.
After you have dialed an outside call,
Press SAVE. Your Display (if you have one) will show “Auto Save.”
Hang up.
You may make 1 or a hundred calls (or more if you need to…) in between.
Press SAVE. Your telephone will redial the number you previously saved and remain off hook for at
least 10 seconds (depending on system programming). And will continue to redial the number
periodically for a number of times (the number of times also depends on system programming).
When the number you dialed answers, lift the handset or press your MIC key to carry on a conversation
and keep the system from hanging up.
Background Music
If your system is equipped with background music or music on hold capabilities, you may choose to have
the music play over your telephone's speaker when your set is idle. Background music will automatically
be interrupted whenever you initiate a telephone call or receive a call.
1. While your set is idle, press [#]. The [SPK] button will light. Background music will be heard through
your telephone speaker.
2. You may discontinue background music by pressing [#] or by pressing the lit [SPK] key.
Barge-In (Override)
If you need to join a conversation for any reason, this feature will let you drop in on an existing
conversation. Please be aware that this option is a level controlled option (from system programming),
so you may be able to override no phones, a few phones or all phones, depending on your telephone’s
access level. Some stations may not have access to this feature.
Dial a station. It is busy (or in Do Not Disturb)
Press 0. If you have access, you will hear a warning tone (so will everyone else in the call) and you will
be allowed into the conversation.
You may also use this feature on a CO line if you do not have an appearance of the station you want to
override.
Lift the handset or press SPKR.
Press the busy CO line.
Press 0. If you have access, you will hear a warning tone (so will everyone else in the call) and you will
be allowed into the conversation.
Caller ID Features
The Caller ID feature on the TD-824i system allows you to identify incoming callers before you answer
the call. This feature is available only to digital telephone sets equipped with an LCD display.
While your telephone set is ringing with an incoming call:
1. Your LCD will display: TK: XX
TransTel
Note: Caller ID information will appear on your LCD with incoming calls, held calls, transferred calls,
and recalls back to your station. You will also ger Caller ID information if you are talking on an
outside line and another calls rings in to your telephone set.
To review Caller ID records:
1. Press the lit Caller ID key on your telephone set.
Press [VOL 

] or [VOL 

] to scroll back and forth through the records.
To view Date and Time:
1. While reviewing a record you may also view the date and time by pressing the [MIC] key.