Operating instructions

2. Dial the extension number to be unrestricted.
3. Press [SAVE].
4. Press [SPK] to return the set to idle.
Check Out:
1. Press [Hotel] and the digit 2.
2. Dial the extension number to be restricted.
3. Press [SAVE].
4. Press [SPK] to return the set to idle.
Conference
You can conference any two parties, internal or outside CO lines.
Establish your conversation with the first party.
Press HOLD to hold the first party.
Get the second party on the line.
Press DND/CN when you have the second party on the line.
You know have a three way conference.
You may continue this procedure to add additional parties to the conference.
You can leave the conference and allow the other two parties to continue the conversation. Just press
the DND/CN key before you hang up. If you don’t press the key and just hang up, the other parties will
be disconnected, if they are both outside lines.
To rejoin the conference, press either CO line button and then the DND/CN key.
If you cannot rejoin an unsupervised conference, you may not have the capability in your class of service.
Check with your system administrator or check system programming to see if your override capability is
enabled.
Conversation monitor
If you need to monitor a conversation for any reason, this feature will let you observe an existing
conversation. Please be aware that this option is a level controlled option (from system programming),
so you may be able to override no phones, a few phones or all phones, depending on your telephone’s
access level. Some stations may not have access to this feature.
Dial a station. It is busy.
Press #. If you have access, you will be connected to the station.
Date and Time Setting (Operator Function)
You must be a system operator to set the date and time.
Press PGM.
Press HOLD
Press 7
Press SAVE
Enter the two digit month (01 - 12)
Enter the two digit date (01 - 31)
Enter the two digit year (97 - 99 or even further)
Enter the hour (00 - 24).
Enter the minute (00-59)
Enter the day of the week (0=Sunday - 7=Saturday)
Press MSG.
Day / Night Service Switching Setup (Operator function)
With this feature, you can make incoming calls ring in different places based on day time or night time.
You should have a LCD equipped telephone to use this feature. It also controls the dialing (toll
restriction) capabilities of telephones if your installer programmed it that way). Yes, you must be an