Operating instructions

Digital LCD telephones allow you to select, activate and program most system features even if you do
not have all the keys that are required to program. This is called the feature menu.
1. Press [PGM],[0] . The LCD will begin scrolling through the feature menu. Each menu item will be
displayed for two seconds. The system will then scroll to the next menu item.
2. You may press [*] to step the display backwards or press [#] to move the display forward. At any time
you may press [0] to access the feature that is displayed on the LCD.
3. Feature programming or activation continues according to the individual descriptions in this features
guide.
Note: The feature menu also lists the keystrokes required in order to invoke or program a
function within the Superkey system.
Flash (To an outside telephone line)
Use this feature to make use of telephone company services such as Call Waiting and Three way calling.
Or to access Centrex features like call transfer and call conferencing.
Press the TRF/FL key.
The outside line will receive a flash.
Note: This feature is dependent upon system programming. Some program settings will provide a
disconnect when the TRF/FL button is pressed.
Forced Account Codes
If telephones are restricted within the system, this feature can allow people to enter a code and place
calls on a telephone that otherwise would be restricted.
Press PGM.
Dial 4
Enter the forced account code.
If the forced account code you dialed is recognized by the system, you will be connected to a CO line.
You can then place an outgoing call.
If the system does not authorize your account code, you will hear busy tone.
Handsfree Operation
All TransTel Digital Telephone sets may be used in the Handsfree mode for On Hook Dialing and
receiving calls handsfree. Models DK1-D and DK1-S offer conversation "Hands Free" on both internal
and outside calls. The DK1-B offers handsfree conversations on intercom calls only.
Note: Intercom Handsfree dialing is dependent upon system programming. Some systems may not
have this capability.
Placing Intercom Calls:
1. Dial the station number that you wish to reach or press the station's [DSS] button.
2. Your station will automatically enter the handsfree speakerphone mode. You will be able to hear call
progress tones through the telephone speaker.
3a. If the party answers, you may lift the handset to begin the conversation.
3b. You may begin the conversation or lift the handset and begin the conversation.