Operating instructions

Operator Timed Reminder or Wake Up
Note: This sets a message only on your own station!
Press PGM.
Press HOLD.
Press 8.
Enter the time you want the reminder to occur (must be in 24 hour format).
Enter the duration (01 through 98). That is how long you want the reminder period to be. This type of
reminder will occur every day at the same time.
OR
Enter 99 for a Wake Up call. This call will occur only once, then never again.
Press SAVE.
Press SPKR to exit.
To cancel:
Press PGM.
Press HOLD
Press 8
Press HOLD.
Paging
Internal Zone
Lift the handset or press SPKR.
Press # and 2.
Then press the one digit Paging Zone Code. (1-8)
You will be connected to the telephones in that zone.
All Paging
Lift the handset or press SPKR.
Press # and 0.
Pulse To Tone Conversion
This feature is of use to you if you are located in an area where your telephone company does not accept
DTMF (Touch Tone),This feature lets you dial DTMF (Touch-Tone) for services such as remote voice
mail, bank by phone, etc.
Press MSG key.
Your telephone set will now dial DTMF digits instead of pulse dialing on a CO line.
Room Monitor
If you need to listen in on another room, such as a baby’s room or a secured room, you can set this
function up so that any telephone in the system can monitor the room by dialing the extension number.
At the telephone that you are going to monitor:
Press the SPKR key or take the handset off hook.
Dial 770.
The telephone is now in the room monitor mode. Any station can now dial the extension number of the
station and be placed in the Room Monitor mode. The calling station will hear room activitiy. This
connection will stay in place until the calling station hangs up or until the Monitored station is placed on
Hook or the SPKR is turned off.
Only one station at a time can monitor a room, but the monitored station will stay in the room monitor
mode until it is reset. So you can set up a monitor from one telephone and if your activities take you to
another room, when you leave the first room, hang up. When you get to the next room, you can re-enter
the monitor mode at the new extension, so you can go all over a building and still be able to monitor an
individual room.