Operating instructions

Saved Number Redial
Saved Number Redial allows you to save a telephone number for use at a later time. This feature is in
addition to Last Number Redial.
Automatic Save:
1. You have dialed an outside call. The number does not answer or is busy.
2. Press [SAVE].
3. The lower portion of the LCD (on display telephones) will display:
Auto Save
4. You may hang up.
5. Make other calls if you wish.
6. While your telephone is idle, press [SAVE].
7. The telephone will access an available line, turn on your speaker and redial the saved number.
8. If you take no action, the system will monitor the call for a programmable period of time and then
disconnect the call and return your telephone to idle.
9. The telephone set will periodically access a CO line and continue to redial the saved number. Steps
7 and 8 will continue for a programmed number of times or until you lift the handset or press [SPK]
while the system is on the line or until you make another call.
Note: If you lift the handset or press [SPK] immediately before step 6 above, the system will dial the
number without the automatic redial functions taking effect.
Saved Number Redial (SuperSave)
You are on an outside call and you need to save a number for dialing later. Supersave provides a way
for you to save the number to your telephone set so that you can dial it later.
SuperSave:
1. You are on an outside call.
2. Press [SAVE].
3. Dial the new telephone number that you wish to save.
4. You may hang up.
5. Make other calls if you wish.
6. While your telephone is idle, press [SAVE].
7. The telephone will access an available line, turn on your speaker and redial the saved number.
8. If you take no action, the system will monitor the call for a programmable period of time and then
disconnect the call and return your telephone to idle.
9. The telephone set will periodically access a CO line and continue to redial the saved number. Steps
7 and 8 will continue for a programmed number of times or until you lift the handset or press while
the system is on the line or until you make another call.
Shift Key
The shift key allows you to use an alternate key map. It is used primarily when you have a use for more
keys than your telephone is capable of displaying. This requires system programming to enable.
Press your SHIFT key (which has been programmed on one of the DSS buttons on your telephone. The
SHIFT key will light. While you are in SHIFT key mode, your telephone will operate as if it is in the
SHIFT key group. To return to your own group, press SHIFT key again and the SHIFT light will go out.
You are now in your telephone’s regular key group.
Speed Dialing
You can use this feature to access frequently dialed telephone numbers.
Lift the handset or press SPKR.