Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual

Access Control Telephone – ACP



Terminate the station wires with the connectors that are provided. The stations will connect to the G2-STU

of KSU. Connections are to the center two pins of the connector (pins 2 – 3).



Connect Tip/Ring terminals from KSU(G2-STU) to the ACP connector (6 contacts).



There is no polarity requirement on Tip and Ring.



Connect Relay for applications such like door open to the ACP connector (6 contacts).



Connect Sensor for applications such like door open alarm to the ACP connector (6 contacts).



Mount ACP connector on ACP itself.



Select the 1

or 2

station. Jumper as below diagram showed.



Mount ACP on the wall.

CAUTION!: Avoid shorting Tip and Ring together. It may damage the G2-MBU or G2-STU board.