Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
45
Series Model TD-1648i/TDS-600 - Programming Manual
Programming Information
This document contains the system forms required to program the TD-1648i/TDS-600 and an explanation of the
parameters.
New Systems
We recommend that all new systems have the system memory reset before system programming takes place.
This ensures that any extraneous information that may be present in system memory is erased and that the
system database will not be corrupt.
To Reset System Memory.
Enter System Programming :
From an LCD equipped TransTel DK1-21(H)/DK1-31 Digital Telephone Set:
1. Press [PRG]. Press [2].
2. Enter Password if programmed. (New systems will not have a system password).
3. Press [SAVE].
4. LCD display will show:
PROGRAM MODE: __
(01 – 92)
5. Enter [2][5]. Press [SAVE]. Display will show:
25- Reset Data
0-9 Default
6. Enter [2].
7. System Database is now reset. LCD will display:
PROGRAM MODE: __
(01 – 92)
8. You may commence database entry at this point, or exit system programming by pressing SPK key
or by lifting and replacing the handset.
To Enter System Programming:
1. Press [PRG]. Press [2].
2. Enter Password if programmed. (New systems will not have a system password).
3. Press [SAVE].
4. LCD display will show:
PROGRAM MODE: __
(01 – 92)
5. You may begin system programming at this point.