Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
47
Alphanumeric Entry
The following table indicates the capabilities of the name programming functions if they are selected on the
system. System Speed Dial, Personal Speed Dial, Stations, CO Lines and Sensors may be programmed with
names.
Key 1 = , . : 1 (Blank Space) Key 2 = A B C 2 ;
Key 3 = D E F 3 / Key 4 = G H I 4 _
Key 5 = J K L 5 - Key 6 = M N O 6 ‘
Key 7 = P Q R S 7 Key 8 = T U V 8 +
Key 9 = W X Y Z 9 Key 0 = ä ü ñ ö 0
Key # = $ ! @ # ) Key * = % ^ & * (
DSS Key 1 = Backspace Cursor (Left) DSS Key 2 = Cursor Forward
If an entry is made that is not within valid system parameters, the TransTel system will not accept the entry when
[SAVE] is pressed. The Speaker on the programming set will return a busy tone and the LCD Display will place
the programming cursor under the offending entry. You may make corrections and press [SAVE] again. If
multiple errors are made, the system will continue to return you to the illegal entries as others are corrected.
It is not necessary to re-enter existing information on a multi-item form. You need enter only the information that
is to be changed. You may move the cursor to the left or right in order to access only the specific entry that you
want to change. You may press [SAVE] without regard for the placement of the cursor on the LCD display.