Operating instructions

48 Issue 1.0 March, 2006
Form 01 - Day Ringing and Ringing Line Preference Assignment
Ring Type : Linear / Circular / Hunt / Private / Common (See Form 35-CO-07)
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Default
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
General:
This program assigns each incoming line to ring the programmed stations. The ringing methods can be LINEAR
(ring the first available station), CIRCULAR (Ring the next station following the last station who just answered an
incoming call), HUNT (Ring the first assigned station for a set period of time (Form 05-08-01) then if no answer
ring the next ring assigned station then the next etc.) COMMON AUDIBLE (All stations will ring simultaneously)
or PRIVATE LINE (First station “owns” the line but all stations assigned will ring). See Program Form: 35-tk-07 to
assign.
Description:
1. This program sets Day Time ringing.
2. The station number can be 2,3,4 digits.
3. A total of 16 stations can be assigned to ring for each trunk.
4. If the location is to be assigned to no station, the location value is set to " 0 ".
5. To clear all entries press [REDIAL].
Note: As you enter stations into the ringing assignment, the top portion of the LCD display will advance, showing
you the corresponding entry. For example: If you start on Form 01-01 (Day ringing for Line 1), the top portion of
your display will show 01-01-01, which corresponds to the first entry. When you dial the digits to add an
extension, the top portion of your display will change to say 01-01-02. That means you are now in position to
enter the second station to ring on this line.
When you press [SAVE] your display will change to 01-02-01, which means the system is now ready for you to
program ringing extensions on Line 2.
Form 02 - Night Ringing and Ringing Line Preference Assignment
Ring Type : Linear / Circular / Hunt / Private / Common (See Form 35-CO-08)
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Default
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
General:
The parameters for this form are the same as for Program Form 01, except it affects Night Service Operation.
Please see the description for Form 01 for available options. See Program Mode: 35-tk-08 to assign LINEAR,
CIRCULAR, HUNT, COMMON AUDIBLE or PRIVATE LINE.
Description:
Description is as above for Form 01.
When you press [SAVE] your display will change to 02-02-01, which means the system is now ready for you to
program ringing extensions on Line 2.