Operating instructions

Issue 1.0 March, 2006

Form 04 - Console (Operator) Assignment Form

Console Group 01

04 – 01 -

01 02 03 04

Default 11 12 13 14

General:

This program permits the selection of the consoles (system operators) in each station group.

Description:

1. There are 8 console groups (Operators) available.

2. A total of four stations can be set to be the operator/console in each group.

3. The first assigned station is the master operator/console.

4. To clear all entries press [REDIAL]. Do this in ALL unused groups.

Note: Stations can be programmed into station groups on Form 41-ext-01 (Group Assignment). When stations

are separated into different station groups, Their “Operator” may be different. A station assigned on form 41-ext-

10 to group 2 will ring the operator(s) programmed on form 04-02 when the user dials 0.

In default system programming, all stations are assigned to Station Group 1.