Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
59
Form 05-05 - System Parameters Form - Codes-3
Form 05-05- 01 02 03 04 05 06 07 08
Item
Range of Entries 0 - 1 0 0 - 6 0 - 9 0 1 0 - 9 0 - 9
Default
1 0 0 0 0 1 7 0
Item
Valid
Settings Description Default
05-05-01 0-3 Wake Up Call Type 1=Music
05-05-02 0-1 Meter Pulse Detect 0=Enable
05-05-03 0-5 Speed Dial Unrestricted-1 0=0
05-05-04 0-9 Speed dial Unrestricted-2 0=0
05-05-05 0-7 Name Feature For Extensions, Trunks, Speed dial 7=Enable All
05-05-06 0-1 Dial Tone Detection 1=Enable
05-05-07 0-9 Auto Redial Attempts 1=2 Times
05-05-08 0-9 Auto Redial Pause Time 0=10 Sec
05-05-01 - W AKE U P C ALL S IGNALING :
This parameter is for the Hotel/Motel environment to decide what an extension will hear upon
receiving a wake up call.
Each station can be set in Mode 44-st-08 to decide whether to hear Background Music or DND
tone
0=VSU (requires Voice Service Unit) 1 = Back-ground music or DND tone.
2 = VSC + Record Wake Up Call History via
SMDR
3 = Back-ground music or DND tone + Record
Wake Up Call History via SMDR
05-05-02 - M ETER P ULSE D ETECTOR :
If setting is Enabled, the system will detect the metering signal from the Exchange during the
conversation. (Not used in North America).
0 = Enable 1 = Disable
05-05-03 - S PEED D IAL U NRESTRICTED (H UNDREDS G ROUP ):
If 05-05-03, 05-05-04 settings are A, B, then the speed dial codes from 100 to AB0 are not toll
restricted. For example if the settings are 1 and 1 then Speed dials up to 110 can be used by
stations whether they conflict with toll restrictions or not. Individual stations can be restricted from
using this feature in Mode 45-st-07.
If 05-05-03, 05-05-04 settings are set to 0, 0, then all speed dial codes are toll restricted if the
station using the speed dial is restricted.
0=000 1=100 2=200 3=300 4=400 5=500 6=600
05-05-04 - S PEED D IAL U NRESTRICTED (T ENS G ROUP ):
See 05-05-03 above
0=00 1=10
2=20 3=30 4-=40 5=50 6=60 7=70 8=80 9=90