Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
63
Form 05-07 - System Parameters Form - Timer/Codes
Form 05-07- 01 02 03 04 05 06 07 08
Item
Range of Entries 0 - 1 0 - 1 0 0 - 1 0 - 7 0 - 9 0 0
Default
0 0 0 0 0 0 0 0
Item
Valid
Settings Description Default
05-07-01 0-1 Intercom Searching 0=Disable
05-07-02 0-1 Toll Override Prevention from quick dial 0=Disable
05-07-03 0 Reserved 0
05-07-04 0-7 DISA Transfer To Console - No Dialing 0=Enable
05-07-05 0-1 KeyPhone Toll Override Prevention 0=Disable
05-07-06 0-9 SMDR Digit Mask 0=Disable
05-07-07 0-9 CO Guard Timer 0=0 ms.
05-07-08 0 Reserved 0
05-07-01 - I NTERCOM S TEP C ALL :
If setting is enable, when calling an internal station which is busy or does not answer, pressing [4]
will call the station on the next port which is in the same station group as the called station. If
setting is disable then there will be no transfer.
0=Disable 1=Enable on Busy
2=Enable on No Answer 3=Enable on Busy and No Answer
05-07-02 - SLT C ALLING P ROOF :
In areas where dial tone from the CO is delayed, this option will disallow dialing before dial tone is
available. If dial tone is delayed, SLT users may attempt to bypass toll control by dialing a DTMF
digit before dial tone is available. Enabling this option causes toll checking to not occur until dial
tone is heard on the CO trunk. If digits are dialed before dial tone is available, they are
disregarded by the TD-824i.
0=Disable 1=Enable
05-07-03 - R ESERVED – S ET TO 0