Operating instructions

66 Issue 1.0 March, 2006
Form 05-08 - System Parameters Form - Timer/Codes
Form 05-08-T
01 02 03 04 05 06 07 08
Item
Range of Entries 0 - 9 0 - 1 0 - 9 0 - 1 0 - 8 0 - 9 0-9 0
Default
0 0 0 0 7 1 4 1
Item
Valid
Settings Description Default
05-08-01 0-9 Ring Hunt Interval 0=0 Sec.
05-08-02 0-1 DSS Access To Other Trunk Group 0=Enable
05-08-03 0-9 SLT Camp On Tone 0=Disable
05-08-04 0-1 DISA Transfer Group (No Answer) 0=Station Group
05-08-05 0-8 SLT Programming digit 7=7 + Code
05-08-06 0-9 DISA TRANSFER Time No Answer or Busy 1=16 Sec
05-08-07 0-9 DISA Transfer Time No Dialing 4=4 Sec.
05-08-08 0-1 Music source selection 1=Ext MOH/Int IC
05-08-01 - R ING H UNT I NTERVAL ( SECONDS ):
If setting is n, Then when an incoming call rings the first ring assigned extension and that
extension is busy, after n seconds the call will ring the second of the ring assigned extensions. If
the 2
nd
extension is busy the call will go to the 3
rd
extension immediately. All stations which have
been passed by the ring assignment will receive off hook busy remind. Up to 16 stations can be in
the ring hunt group. If the setting is 0 then only the first ring assigned station will ring.
0=0 1=2 2=4 3=6 4=8
5=15 6=30 7=60 8=120 9=250
05-08-02 - D IRECT CO A CCESS :
This feature enables or disables the ability of stations to
use a DSS key to access CO lines not in their own dial 9
group.
0=Disable 1=Enable
05-08-03 - SLT B USY R EMIND T ONE T IMER :
This feature enables a tone to indicate call waiting for a busy single line telephone and sets the
interval between tones. The interval between tones will be the Off Hook Busy Remind Interval (t) x
by the setting in this parameter. Off Hook Busy Remind Time is set in Mode 05-01-05.
0=Disable 1=1 X Value of Form 05-01-05 2=2 X Value of Form 05-01-05
3=3 X Value of Form 05-01-05 4=4 X Value of Form 05-01-05 5=5 X Value of Form 05-01-05
6=6 X Value of Form 05-01-05 7=7 X Value of Form 05-01-05 8=8 X Value of Form 05-01-05
9=9 X Value of Form 05-01-05