Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
69
05-09-05 - R ESERVED :
05-09-06 - UCD E NABLE T IME :
This parameter is to set the time duration before the system answers an incoming call when the ring
assigned station(s) are busy, if a VMU card is installed. The incoming call will show as a normal ring
signal on the DSS key and can be answered by the operator at any time even while the voice
message is playing to the caller.
0=5 seconds 1=10 seconds 2=15 seconds 3=20 seconds 4=25 seconds
5=30 seconds 6=35 seconds 7=40 seconds 8=45 seconds 9=50 seconds
05-09-07 - UCD H OLD R ECALL T IME :
After the assigned time duration, if a station in the hunt group or the system operator has not
become free, the caller will recall the VMU and VMU 2
nd
UCD recording will be played. This time
sets the hold value. The message will be played to the caller every time the recall time is reached
until answered by the operator or the caller hangs up.
0=disabled (Does
not recall)
1=30 seconds 2=45 seconds 3=60 seconds 4=75 seconds
5=90 seconds 6=105 seconds 7=120 seconds 8=135 seconds 9-150 seconds
05-09-08 - UCD D URATION T IME :
If a call has not been answered by a live person by the time this timer expires, the system will
disconnect the outside caller. The system will play a warning message to the caller before releasing
the call
0=Timer Disabled 1=5 minutes 2=10 minutes 3=15 minutes 4=20 minutes
5=25 minutes 6=30 minutes 7=35 minutes 8=40 minutes 9=45 minutes