Operating instructions
70
Issue 1.0 March, 2006
Form 05-10 - Voice Mail Leading Digits
Form 05-10-T
01 02 03 04 05 06 07 08
Range of Entries
Default
d d d d d d d d
Item
Valid
Settings
Description
Default
05-10-01 Leading Digit 1 For Voice Mail Forwarding d = None
05-10-02 Leading Digit 2 For Voice Mail Forwarding d = None
05-10-03 Leading Digit 3 For Voice Mail Forwarding d = None
05-10-04 Leading Digit 4 For Voice Mail Forwarding d = None
05-10-05 Leading Digit 5 For Voice Mail Forwarding d = None
05-10-06 Leading Digit 6 For Voice Mail Forwarding d = None
05-10-07 Leading Digit 7 For Voice Mail Forwarding d = None
05-10-08
0 -9,*,#
DND
HOLD
Leading Digit 8 For Voice Mail Forwarding d = None
Description:
This parameter allows the system to insert digits before the call forwarded station number when the call forward
is received by the voice mail port if Standard Protocol is selected. If the station numbering is only 2 or 3 digits the
system will insert additional digits if the Voice Mail requires more. The last digits of the voice mail box number
will still have to be the same as the station numbering for correct recognition. The HOLD key can be used to
insert a pause in the DTMF tone sending and will display as a (p). The DND key is no digits sent and is shown as
(d).
Example:
The TransTel is set to 2 digit numbering but the voice mail requires 4 digits. The voice mail also requires a pause
between answering the call and the tones being sent. Set this parameter to the following
05-10-IP SYS PAR
p 9 9 d d d d d
When the call forwarded station 11 is answered by the voice mail port after the pause time the digits 9911 will be
sent to the port by the system. If station 11's voice mail box is 9911 then the mailbox number 9911 will be
automatically opened by the tones.
There are 2 different Voice Mail Protocols available in the TransTel G series depending on the setting in Mode
05-12-05. If this mode is set to 0 then the Protocol will be the leading digits entered in this Mode plus the Station
Number of the forwarded station. If Mode 05-12-05 is set to 1 then the Enhanced Protocol shown on the following
page will be used.