Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
73
Form 05-11 - System Parameters Form - Supplemental.
Form 05-11-T
01 02 03 04 05 06 07 08
Item
Range Of Entries 0 0 0 0 0-3 0-9 0-9 0-8
Default
0 0 0 1 0 0 5 0
Item
Valid
Settings Description Default
05-11-01 0 Reserved 0=
05-11-02 0-1 DISA Password – 1 / 24 Sets 0=1
05-11-03 0-2 Select Music on Hold or Ring Back Tone 1=MOH
05-11-04 0-1 DISA Queuing if VSU is busy or absent 1=Queue
05-11-05 0-3 DISA Special Digit Access 0=[8],[9],[*],[#]
05-11-06 0-9 DISA Transfer Timer: 0=2 Times
05-11-07 0-9 Door Phone Ringing Time 5=30 Sec.
05-11-08 0-8 DISA Single Digit Dialing 0=Disable
05-11-01 - R ESERVED :
05-11-02 - DISA P ASSWORD :
This parameter when enabled will increase the number of DISA passwords from 1 to 24. At the
default setting of 0 the DISA password will be set in Form 13-02. If the parameter is set to 1, 24
passwords are available and they will be the same as the forced account codes numbers (25-48).
Forced account codes are set in Form 17-(00-48).
0=Disable 1=Enable
05-11-03 - M USIC O N H OLD /R INGBACK ON T RANSFER :
This parameter selects what the incoming caller will hear during Ring Transfer and Hold Recall
conditions. The feature is designed for the U.S. to prevent the caller from hearing recognizing the
TD-824i International Ring Back Tone and mistake it as a disconnect or busy signal and hanging
up even though their call is still in progress.
0 = Ring Back Tone 1 = Music On Hold 2 = Silence
05-11-04 - DISA Q UEUING TO VSU (N OT APPLICABLE ON TD-1648 I ):
This parameter is not valid on the TD-1648i. It must be set to 0 = disable queuing in order for
DISA to operate.
0 = Disable Queuing 1 = Enable Queuing
05-11-05 - DISA D IGIT A CCEPTANCE :
This parameter sets which of the system functions are accessible by DISA callers
0=All special digits allowed 1=[#] Allowed - [9],[0] Disallowed
2=[9],[0] Allowed - [*],[#] Disallowed 3=No Special Digits Allowed