Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
75
Form 05-12 - System Parameters Form - Miscellaneous
Form 05-12-T
01 02 03 04 05 06 07 08
Item
Range Of Entries 0 0 0-1 0 - 4 0-1 0 0 0
Default
0 0 0 2 0 0 0 0
Item
Valid
Settings Description Default
05-12-01 0-1 Call Transfer Method – Key Telephone 0=Key Phone
05-12-02 0 Reserved 0
05-12-03 0-1 Exclusive hold capability 0=Enable
05-12-04 0-9 Door Unlock Relay Activation Time 2=3 Sec
05-12-05 0-7 Voice Mail Call Forward Protocol Type / mute digits 7=Muted DTMF
05-12-06 0-1 Linear/Circular Trunk group access 0=Linear
05-12-07 0-9 LED indication of Check in / Check out on DSS console 0=Disable
05-12-08 0 Reserved 0
05-12-01 - K EYPHONE T RANSFER M ETHOD :
If set to 0, transfer procedure requires that the TRF/FL
0=Must use TRF/FL key, 1=Can transfer by hanging up
05-12-02 - R ESERVED :
05-12-03 - E XCLUSIVE H OLD :
A call on exclusive hold cannot be readily retrieved by any other station. On all TransTel digital telephone
stations, a call on exclusive hold will appear to other
stations as a busy line (steady illuminated red pushbutton).
The call owner will see a slow flash, to differentiate the exclusive call from other calls in the system.
0=Enable 1=Disable
05-12-04 - D OOR R ELAY A CTIVATION T IMER :
This parameter sets the time that the door unlock relay will remain activated after the Door Unlock function is
activated by the user. The Door unlock relay is programmed in Mode 06
0=1 second 1=2 seconds 2=3 seconds 3=4 seconds 4=5 seconds
5=6 seconds 6=7 seconds 7=8 seconds 8=9 seconds 9=10 seconds