Operating instructions

88 Issue 1.0 March, 2006
Form 10-gp-IP - Intercom or DISA Single Digit Assignment
General:
This program permits the stations in one or more station groups to call a specific station by dialing one digit only.
To enable station Single Digit Dialing, Form 05-04-07 must be set to 1 = Enabled.
The settings in this Form are also used by DISA Single Digit Dialing (Form 05-11-08 to enable for DISA use).
Description:
S INGLE D IGIT I NTERCOM :
When single digit dialing is enabled and a group (1-8) selected in Form 41-stn-01 then extensions will be able to
dial the stations in the group selected by dialing the digits 1 to 5. The digit 1 will call the first station in the group,
2 will dial the second station in the group and so on up to digit 5. The caller can also dial 6 and then dial a full
extension number to call other extensions or dial (0 or 9) to call the operator.
If a particular group has no entries programmed, the stations in the same number station group will not have
single digit dialing and will not have to use the station to station prefix.
Note: Default programming places all stations in Single Digit Group 1.
S INGLE D IGIT DISA:
When single digit dialing is enabled and a group (1-8) selected in Form 05-11-08 then DISA callers will be able to
dial the stations in the group selected by dialing the digits 1 to 5. The digit 1 will call the first station in the group,
2 will dial the second station in the group and so on up to digit 5. The caller can also dial 6 and then dial a full
extension number to call other extensions or dial (0 or 9) to call the operator.
If a position is left programmed to 0 then station numbers starting with the digit, which corresponds, to this
position can be dialed in full.
Example
10-gp-IP S.D.I.
11 13 22 00 55
In the above example an incoming DISA caller who dials 1 will call station 11, dialing 2 will call station 13, 3 will
call Station 22. Dialing 4 will allow the caller to dial the full extension number of any extension, which starts with
4, e.g. 44. 55 has been assigned as a Hunt Group Pilot number so a DISA caller dialing 5 will call the Station
hunting group which has 55 as it's pilot Number. Pilot numbers are set in Mode 67 and Hunt groups are
programmed in Mode 68 and 69.
Form 10 - Single Digit Dialing Assignment
Form 10 - Single Digit Group ___ (01-08) Form 10 - Single Digit Group ___ (01-08)
Item 01 02 03 04 05 Item 01 02 03 04 05
Station Station
Form 10 - Single Digit Group ___ (01-08) Form 10 - Single Digit Group ___ (01-08)
Item 01 02 03 04 05 Item 01 02 03 04 05
Station Station