Operating instructions

TransTel TD-1648i / TDS-600 Programming Manual
93
CASE EXPLANATION:
CASE 1: October 2, 08:35 A.M., Station 112 made a call (telephone No. is 00116495256611) through line 1. The
call lasted 2 minutes and 35 seconds, Account code No. 12345678 was entered for the call and 12-meter pulses
were recorded.
CASE 2: October 2, 08:45 A.M., An incoming call on line 2, rang for 10 seconds, station 115 answered the call
and stored an Account No. 87654321.
CASE 3: October 2, 12:00 P.M., An incoming call through line 3, rang for 35 seconds, no one answered and the
call was abandoned.
CASE 4: October 2, 12:10 P.M., Station 112 made a Long Distance call through line 4 by Forced Account Code
1 and 23 meter pulses were recorded.
CASE 5: October 2, 12:30 P.M., Station 112 made a call by Forced Account Code but was denied because of a
wrong code.
CASE 6: October 2, 12:35 P.M., Station 116 made a call, which was restricted.
CASE 7: Line 1 was used by station 121 for 55 seconds then put on hold. One meter pulse was recorded against
this station for its section of the call.
CASE 8: The held line 1 was answered by station 117 and he occupied the line for 3 minutes and 10 seconds.
Four meter pulses were recorded against this station for its section of the call.
CASE 9: Incoming Line 3, using the DISA function, made an outside call 018220212 on line 5. The Duration time
is for line 5. 3 meter pulses were recorded for this call.
CASE 10: DISA is completed. The Duration time is for line 3.
CASE 11: Incoming call on an ISDN system. The number displayed is the Indial number dialed by the calling
party. The system can be programmed on a station by station basis to select whether calls to that station will
display the Indial number dialed or the CLI information of the incoming caller
CASE 12: An incoming call rang for 35 seconds and no one answered. The CLI number of the calling station is
displayed.
CASE 13: An incoming call on line 5 (ISDN) was answered by station 111. The SMDR displayed the CLI number
(294150100) of the calling party and the extension number (112) of the calling party. The extension number
shown is what the system will receive if the call is from another TransTel with ISDN. The format may be different
or non-existent from other telephone systems or on PSTN lines. The system can be programmed on a station by
station basis to select whether calls to that station will display the Indial number dialed or the CLI information of
the incoming caller. The number 94150100 is the pilot number of the Indial group.
CASE 14: An incoming call rang for 27 seconds and no one answered. The Indial number the calling station
dialed is displayed.