Specifications

MSD Software Manual PRELIMINARY Release Chapter 6 The Extended Audio Matrix.
PPM-Bargraph then the input to the ‘Audio Vector Oscilloscope’ / ‘Jelly-Fish’
will change accordingly. Please see section B.1 'Factory Presets' for examples
on how to configure the matrix.
The ‘Audio Vector Oscilloscope’ is using dynamic auto adjustment (scaling) on
the horizontal and vertical scales. Auto scaling enables the display window to
‘follow’ the average input signal level, resulting in a readout that fills most of the
window most of the time. Because of this dynamic scaling it is important to
notice that the ‘Audio Vector Oscilloscope’ can not be used to monitor the
actual level of the signal but only the relative value.
This auto-adjustment feature (referred to as the ‘Meter Compressor’ or just ‘C-
OFF’) can be enabled or disabled in the ‘Audio Matrix’. Please refer to section
6.3.2.2 ‘Meter Compressor.’.
PRELIMINARY Release Page 19 of 64.