Specifications

Chapter 2 Full Feature Mode. PRELIMINARY Release MSD Software Manual.
2 Full Feature Mode.
When the MSD is powered up for the first time the MSD will start in the ‘Full
Feature Mode’
The Main Menu in Full Feature Mode.
In ‘Full Feature Mode’ the MSD will show the three main metering functions
and the main menu.
: The Phase Correlation Meter.
: The Audio Vector Oscilloscope / Jelly-Fish™
: The Peak Programme Meter (PPM).
: The main softkey menu.
2.1 Navigating the softkey menus.
The MSD is controlled using the eight softkeys placed below the LCD display.
These softkeys correspond to the menues in the lower part of the LCD display.
These menues can have up to 8 different items or functions. The leftmost key
in a menu will in most cases exit to the previous menu level.
An example is the tone generator menu, where it is possible to change the
frequency and the output level of the built in sinus generator.
The sinus-generator menu.
Key  will exit to the previous menu.
Key  is a flag that can be set or cleared, enabling or disabling a particular
function. If a flag is set, the function is enabled and the square will be green.
Key  and  ([HERTZ] and [dBu]) are just labels, they have no function.
Key , ,  and  are two pairs of edit keys which will increase or
decrease the value shown between them.
Page 2 of 64. PRELIMINARY Release