Specifications

B Factory Presets. PRELIMINARY Release MSD Software Manual.
B.1.5 MSD600M Preset #5 – 'LRCS' Pro-Logic Surround Sound.
Applies to : MSD600M, MSD600M++, PT0600M, PT0660M, PT0660M-LS
Description: In the 'LRCS' preset the Jelly-Fish™ monitors a four channel
surround sound signal applied as discrete channels to the first two analogue
input modules. The Phasemeter monitors the PPM Channel 1 and 2.
The Jelly-Fish™ is configured using rows 55 to 62. In order to show the
surround sound information, this setup uses five vectors in the Jelly-Fish™.
The centerchannel are coupled to the 'CENT' vector (#55). The surround
channel are coupled to both the 'C+2' and 'C+3' vectors. (#57 and #58).
Depending on the type of installed modules this preset can vary from MSD to
MSD.
If the MSD is fitted with '2 Channel Analogue Input Modules' then the preset is
configured as the following table shows.
Page 58 of 64 PRELIMINARY Release
Preset #5 – LRCS
Destination
Number.
Destination
Name.
Source
Number.
Source
Name.
Phase
53 PHAS 57 CH 1
54 PHAS 58 CH 2
Jelly-Fish™
55 CENT 59 CH 3
56 C + 1 58 CH 2
57 C + 2 60 CH 4
58 C + 3 60 CH 4
59 C + 4 57 CH 1
60 C + 5 51 OFF
61 C + 6 51 OFF
62 C + 7 51 OFF
Peak Programme Meter
65 CH 1 33 L
66 CH 2 34 R
67 CH 3 37 C
68 CH 4 38 S
69 CH 5 51 OFF
70 CH 6 51 OFF
71 CH 7 51 OFF
72 CH 8 51 OFF
Destinations 1 to 48 and 73 to 96 are set to OFF (#51).